CVT Toyota K112F

CVT Toyota K112F
Type
CVT
Drive
AWD
Torque
up to 230 Nm
Engine size
up to 2.4 L
Oil capacity
8.7 LToyota CVT Fluid FE
Lifespan
~250 000 km

The Toyota K112F continuously variable transmission was produced at the Aisin plant from 2005 to 2019 and was installed on the all-wheel drive Alphard, Blade and Estima with the 2.4-liter 2AZ-FE engine. The front-wheel drive version of this transmission is known under its own index, the K112.

Specifications

Type continuously variable transmission
Number of gears ∞
Type of drive all wheel
Engine volume, l up to 2.4
Torque output, Nm up to 230
Recommended oil Toyota CVT Fluid FE
Oil capacity, liter 8.7
Partial replacement, liter 4.0
7.0 with the oil pan removed
Maintenance every 60 000 km
Gearbox lifespan, km ~250 000 km
Weight, kg 115.9

Gear ratios Toyota K112F

Using a 2010 Toyota Blade with a 2.4 liter engine as an example:

Forward 2.396 – 0.428
Reverse 1.668
Final Drive 5.470

Using

The transmission was installed on:

  • Toyota Alphard 2 (AH20) in 2008 – 2015;
  • Toyota Blade 1 (E150) in 2006 – 2012;
  • Toyota Estima 3 (XR50) in 2006 – 2019;
  • Toyota Mark X ZiO 1 (NA10) in 2007 – 2013;
  • Toyota RAV4 3 (XA30) in 2005 – 2016;
  • Toyota Vanguard 1 (XA30) in 2007 – 2013;
  • Toyota Vellfire 1 (AH20) in 2008 – 2015.

Disadvantages of the Toyota K112F gearbox

  • If you drive carefully and change the oil regularly, this transmission lasts up to 200,000 km;
  • However, it does not tolerate hard starts and wheelspin, which shortens bearing life;
  • Under dynamic driving the fluid also gets dirty quickly and the solenoids wear out;
  • Because of this the oil pressure drops, shortening the life of the belt and the bushings;
  • And if you ignore the humming for long, the oil pump bushing will simply be spun in its seat;
  • This transmission is also afraid of overheating, so keep the heat exchanger clean.

Frequently asked questions about the Toyota K112F

What type of transmission is the Toyota K112F?

The Toyota K112F is a continuously variable transmission for all-wheel drive cars.

How much torque can the Toyota K112F handle?

The Toyota K112F is designed for torque up to 230 Nm and engines up to 2.4 liters.

How much oil does the Toyota K112F take and which one?

The Toyota K112F takes 8.7 liters of oil. Partial replacement, liters: 4.0; 7.0 with the oil pan removed. Recommended oil: Toyota CVT Fluid FE.

How often should the Toyota K112F be serviced?

Recommended service interval: every 60 000 km.

How long does the Toyota K112F last?

With proper maintenance, the Toyota K112F typically lasts about 250 000 km.

How much does the Toyota K112F weigh?

The Toyota K112F weighs about 115.9 kg.

What are the gear ratios of the Toyota K112F?

Using a 2010 Toyota Blade with a 2.4 liter engine as an example: forward 2.396 - 0.428, reverse 1.668, final drive 5.470.

What cars was the Toyota K112F installed on?

Toyota Alphard 2 (AH20) in 2008 – 2015; Toyota Blade 1 (E150) in 2006 – 2012; Toyota Estima 3 (XR50) in 2006 – 2019; Toyota Mark X ZiO 1 (NA10) in 2007 – 2013; Toyota RAV4 3 (XA30) in 2005 – 2016; Toyota Vanguard 1 (XA30) in 2007 – 2013 and 1 more (see the full list above).

What are the common problems of the Toyota K112F?

If you drive carefully and change the oil regularly, this transmission lasts up to 200,000 km. However, it does not tolerate hard starts and wheelspin, which shortens bearing life. All known problems.

El Guardiola
Author
El Guardiola

Doctor of Technical Sciences, former engineer at the Volkswagen plant in Chattanooga, Tennessee (10 years of experience), holder of certificates and patents for inventions, author of a training manual for employees of the Volkswagen Group of America.
I consider the automotive transmission to be one of the most ingenious mechanisms in a car and I want to provide information about gearboxes to a wide range of car owners.

The most complete catalog of car transmissions: specifications, gear ratios, oil capacity, typical problems and lifespan of automatic, CVT, DCT and manual gearboxes.

Scroll to Top