The Toyota U760E 6-speed automatic transmission was built at the company’s plant from 2008 to 2021 and was installed on such popular models as the Camry, Venza, Sienna and RAV4. This gearbox was paired with four-cylinder engines: the 2.5-liter 2AR-FE and the 2.7-liter 1AR-FE.
Specifications
| Type | automatic transmission |
| Number of gears | 6 |
| Type of drive | front |
| Engine volume, l | up to 2.7 |
| Torque output, Nm | up to 250 |
| Recommended oil | Toyota ATF WS |
| Oil capacity, liter | 6.5 |
| Partial replacement, liter | 2.8 |
| Maintenance | every 60 000 km |
| Gearbox lifespan, km | ~300 000 km |
| Weight, kg | 94 |
Gear ratios Toyota U760E
Using a 2010 Toyota RAV4 with a 2.5 liter engine as an example:
| Main | 3.815 |
| 1st | 3.300 |
| 2nd | 1.900 |
| 3rd | 1.420 |
| 4th | 1.000 |
| 5th | 0.713 |
| 6th | 0.608 |
| Reverse | 4.148 |
Using
The transmission was installed on:
- Toyota Camry 6 (XV40) in 2009 – 2011;
- Toyota Camry 7 (XV50) in 2011 – 2017;
- Toyota Camry 8 (XV70) in 2017 – 2021;
- Toyota Highlander 2 (XU40) in 2009 – 2013;
- Toyota Highlander 3 (XU50) in 2013 – 2019;
- Toyota RAV4 3 (XA30) in 2008 – 2012;
- Toyota RAV4 4 (XA40) in 2012 – 2018;
- Toyota Sienna 3 (XL30) in 2010 – 2012;
- Toyota Venza 1 (GV10) in 2009 – 2016;
- Scion tC 2 (AT20) in 2010 – 2016.
Disadvantages of the Toyota U760E gearbox
- This is a perfectly reliable transmission, but its service life depends heavily on how it is driven;
- Under active driving the lockup clutch wear debris clogs the valve body solenoids;
- If you ignore clutch wear, vibrations will damage the planetary gearsets;
- And with prolonged wheelspin the torque converter bushing can overheat and weld itself to the hub;
- Another weak point is the retainer of the main thrust bearing, which works loose;
- The rear cover wear known from its predecessors is relevant here as well.
Frequently asked questions about the Toyota U760E
What type of transmission is the Toyota U760E?
The Toyota U760E is a 6-speed automatic transmission for front-wheel drive cars.
How much torque can the Toyota U760E handle?
The Toyota U760E is designed for torque up to 250 Nm and engines up to 2.7 liters.
How much oil does the Toyota U760E take and which one?
The Toyota U760E takes 6.5 liters of oil (2.8 liters for a partial change). Recommended oil: Toyota ATF WS.
How often should the Toyota U760E be serviced?
Recommended service interval: every 60 000 km.
How long does the Toyota U760E last?
With proper maintenance, the Toyota U760E typically lasts about 300 000 km.
How much does the Toyota U760E weigh?
The Toyota U760E weighs about 94 kg.
What are the gear ratios of the Toyota U760E?
Using a 2010 Toyota RAV4 with a 2.5 liter engine as an example: final drive 3.815, 1st 3.300, 2nd 1.900, 3rd 1.420, 4th 1.000, 5th 0.713, 6th 0.608, reverse 4.148.
What cars was the Toyota U760E installed on?
Toyota Camry 6 (XV40) in 2009 – 2011; Toyota Camry 7 (XV50) in 2011 – 2017; Toyota Camry 8 (XV70) in 2017 – 2021; Toyota Highlander 2 (XU40) in 2009 – 2013; Toyota Highlander 3 (XU50) in 2013 – 2019; Toyota RAV4 3 (XA30) in 2008 – 2012 and 4 more (see the full list above).
What are the common problems of the Toyota U760E?
This is a perfectly reliable transmission, but its service life depends heavily on how it is driven. Under active driving the lockup clutch wear debris clogs the valve body solenoids. All known problems.





