The Toyota K311F continuously variable transmission was produced at the Japanese plant from 2006 to 2021 and was installed on the all-wheel drive Allion, Isis and Wish with the 1.8-liter 2ZR-FE and 2ZR-FAE units. The front-wheel drive version of this transmission is known under its own index, the K311.
Specifications
| Type | continuously variable transmission |
| Number of gears | ∞ |
| Type of drive | all wheel |
| Engine volume, l | up to 1.8 |
| Torque output, Nm | up to 185 |
| Recommended oil | Toyota CVT Fluid FE Toyota CVT Fluid TC before 2010 |
| Oil capacity, liter | 7.4 |
| Partial replacement, liter | 4.5 |
| Maintenance | every 60 000 km |
| Gearbox lifespan, km | ~250 000 km |
| Weight, kg | 75.2 |
Gear ratios Toyota K311F
Using a 2008 Toyota Allion with a 1.8 liter engine as an example:
| Forward | 2.386 – 0.411 |
| Reverse | 2.505 |
| Final Drive | 5.698 |
Using
The transmission was installed on:
- Toyota Auris JDM 1 (E150) in 2006 – 2012;
- Toyota Allion 2 (T260) in 2007 – 2021;
- Toyota Corolla Axio 1 (E140) in 2006 – 2012;
- Toyota Corolla Fielder 2 (E140) in 2006 – 2012;
- Toyota Corolla Rumion 1 (E150) in 2007 – 2015;
- Toyota Isis 1 (AM10) in 2009 – 2017;
- Toyota Premio 2 (T260) in 2007 – 2021;
- Toyota Wish 2 (AE20) in 2009 – 2017.
Disadvantages of the Toyota K311F gearbox
- With careful use this CVT is perfectly reliable and lasts quite a long time;
- But with frequent hard starts the bearings can start humming before 100,000 km;
- And overly long wheelspin can strip the splines in the Forward drum altogether;
- It is also important to change the oil regularly or the valve body will get clogged with wear debris;
- The pressure in the transmission will then drop and the belt and bushings will wear out quickly;
- This CVT is also afraid of overheating, so keep the heat exchanger clean.
Frequently asked questions about the Toyota K311F
What type of transmission is the Toyota K311F?
The Toyota K311F is a continuously variable transmission for all-wheel drive cars.
How much torque can the Toyota K311F handle?
The Toyota K311F is designed for torque up to 185 Nm and engines up to 1.8 liters.
How much oil does the Toyota K311F take and which one?
The Toyota K311F takes 7.4 liters of oil (4.5 liters for a partial change). Recommended oil: Toyota CVT Fluid FE; Toyota CVT Fluid TC before 2010.
How often should the Toyota K311F be serviced?
Recommended service interval: every 60 000 km.
How long does the Toyota K311F last?
With proper maintenance, the Toyota K311F typically lasts about 250 000 km.
How much does the Toyota K311F weigh?
The Toyota K311F weighs about 75.2 kg.
What are the gear ratios of the Toyota K311F?
Using a 2008 Toyota Allion with a 1.8 liter engine as an example: forward 2.386 - 0.411, reverse 2.505, final drive 5.698.
What cars was the Toyota K311F installed on?
Toyota Auris JDM 1 (E150) in 2006 – 2012; Toyota Allion 2 (T260) in 2007 – 2021; Toyota Corolla Axio 1 (E140) in 2006 – 2012; Toyota Corolla Fielder 2 (E140) in 2006 – 2012; Toyota Corolla Rumion 1 (E150) in 2007 – 2015; Toyota Isis 1 (AM10) in 2009 – 2017 and 2 more (see the full list above).
What are the common problems of the Toyota K311F?
With careful use this CVT is perfectly reliable and lasts quite a long time. But with frequent hard starts the bearings can start humming before 100,000 km. All known problems.





