The Toyota K320 continuously variable transmission has been produced in Japan since 2020 and is paired with the 1.5-liter M15A-FKS engine in the Corolla, Yaris, and Sienta. This transmission belongs to the Direct Shift-CVT family and is also available in the all-wheel-drive K320F version.
Specifications
| Type | continuously variable transmission |
| Number of gears | ∞ |
| Drive type | front |
| Engine displacement, L | up to 1.5 |
| Max torque, Nm | up to 160 |
| Recommended oil | Toyota CVT Fluid FE |
| Oil capacity, L | 8.4 |
| Partial oil change, L | 4.0 |
| Service interval | every 60 000 km |
| Service life, km | ~250 000 km |
| Weight, kg | 88.2 |
Gear ratios Toyota K320
Gear ratios for the 2022 Toyota Yaris with a 1.5-liter engine:
| Final drive | 4.007 |
| Launch gear | 3.362 |
| Variator range | 2.236 – 0.447 |
| Reverse | 3.120 |
Applications
The transmission was installed on:
- Toyota Corolla 12 (E210) since 2022;
- Toyota Sienta 3 (XP210) since 2022;
- Toyota Yaris 4 (XP210) since 2020;
- Toyota Yaris Cross 1 (XP210) since 2020.
Disadvantages of the Toyota K320 gearbox
- The CVT section in this transmission is engaged by a multi-plate clutch. Its life depends on driving style: frequent hard starts wear it out quickly;
- A known weak point of this series is short-lived pulley bearings, though they usually start humming only after 150,000 km;
- Owner forums report belt failures before 100,000 km; the danger is that the transmission keeps driving in first gear and destroys itself;
- Owners also frequently complain about sudden error codes caused by debris sticking to the sensors, so change the transmission fluid more often;
- The manufacturer rates the K320 service life at 200,000 km, but it can last up to 250,000 km.
Frequently asked questions about the Toyota K320
What type of transmission is the Toyota K320?
The Toyota K320 is a continuously variable transmission for front-wheel drive cars.
How much torque can the Toyota K320 handle?
The Toyota K320 is designed for torque up to 160 Nm and engines up to 1.5 liters.
How much oil does the Toyota K320 take and which one?
The Toyota K320 takes 8.4 liters of oil (4.0 liters for a partial change). Recommended oil: Toyota CVT Fluid FE.
How often should the Toyota K320 be serviced?
Recommended service interval: every 60 000 km.
How long does the Toyota K320 last?
With proper maintenance, the Toyota K320 typically lasts about 250 000 km.
How much does the Toyota K320 weigh?
The Toyota K320 weighs about 88.2 kg.
What are the gear ratios of the Toyota K320?
Gear ratios for the 2022 Toyota Yaris with a 1.5-liter engine: final drive 4.007, Launch gear 3.362, Variator range 2.236 - 0.447, reverse 3.120.
What cars was the Toyota K320 installed on?
Toyota Corolla 12 (E210) since 2022; Toyota Sienta 3 (XP210) since 2022; Toyota Yaris 4 (XP210) since 2020; Toyota Yaris Cross 1 (XP210) since 2020.
What are the common problems of the Toyota K320?
The CVT section in this transmission is engaged by a multi-plate clutch. Its life depends on driving style: frequent hard starts wear it out quickly. A known weak point of this series is short-lived pulley bearings, though they usually start humming only after 150,000 km. All known problems.





