The Toyota U660E 6-speed automatic transmission was built at the Japanese plant from 2006 to 2018 and was installed on the Venza, Camry, Sienna and Avalon together with the 3.5-liter V6 2GR-FE unit. On Lexus RX crossovers this gearbox was fitted under its own index, Aisin TM-60LS.
Specifications
| Type | automatic transmission |
| Number of gears | 6 |
| Type of drive | front |
| Engine volume, l | up to 3.5 |
| Torque output, Nm | up to 400 |
| Recommended oil | Toyota ATF WS |
| Oil capacity, liter | 6.5 |
| Partial replacement, liter | 3.0 4.5 with the oil pan removed |
| Maintenance | every 60 000 km |
| Gearbox lifespan, km | ~300 000 km |
| Weight, kg | 104 |
Gear ratios Toyota U660E
Using a 2012 Toyota Venza with a 3.5 liter engine as an example:
| Main | 4.398 |
| 1st | 3.300 |
| 2nd | 1.900 |
| 3rd | 1.421 |
| 4th | 1.000 |
| 5th | 0.713 |
| 6th | 0.609 |
| Reverse | 4.148 |
Using
The transmission was installed on:
- Lexus ES350 5 (XV40) in 2006 – 2012 (as TM-60LS);
- Lexus ES350 6 (XV60) in 2012 – 2018 (as TM-60LS);
- Lexus RX270 3 (AL10) in 2010 – 2015 (as TM-60LS);
- Lexus RX350 3 (AL10) in 2008 – 2015 (as TM-60LS);
- Toyota Alphard 2 (AH20) in 2008 – 2015;
- Toyota Alphard 3 (AH30) in 2015 – 2017;
- Toyota Aurion 1 (XV40) in 2006 – 2012;
- Toyota Aurion 2 (XV50) in 2012 – 2017;
- Toyota Avalon 3 (XX30) in 2007 – 2012;
- Toyota Avalon 4 (XX40) in 2012 – 2018;
- Toyota Avensis 3 (T270) in 2008 – 2015;
- Toyota Blade 1 (E150) in 2006 – 2012;
- Toyota Camry 6 (XV40) in 2006 – 2011;
- Toyota Camry 7 (XV50) in 2011 – 2017;
- Toyota Estima 3 (XR50) in 2007 – 2016;
- Toyota Highlander 3 (XU50) in 2013 – 2016;
- Toyota Mark X ZiO 1 (NA10) in 2007 – 2013;
- Toyota Previa 3 (XR50) in 2007 – 2016;
- Toyota RAV4 3 (XA30) in 2009 – 2012;
- Toyota RAV4 4 (XA40) in 2012 – 2018;
- Toyota Sienna 3 (XL30) in 2010 – 2016;
- Toyota Venza 1 (GV10) in 2008 – 2016;
- Toyota Verso 3 (AR20) in 2009 – 2015.
Disadvantages of the Toyota U660E gearbox
- This gearbox is paired with powerful engines, and under active driving with frequent hard starts the lockup clutch wears out quickly and clogs the valve body. Sometimes the torque converter hub overheats so badly that it welds itself to the bushing;
- The best known weak point of this automatic transmission is the main thrust bearing: its retaining ring works loose and the bearing destroys its seat in the gearbox housing. Vibrations then appear and break up the planetary gearset bearings;
- With regular overheating the rubber-coated pistons may also start to peel. On the electrical side, the selector position board with the temperature sensor is replaced most often;
- The manufacturer rated the U660E service life at 200,000 km, but this automatic transmission covers 300,000 km as well.
Frequently asked questions about the Toyota U660E
What type of transmission is the Toyota U660E?
The Toyota U660E is a 6-speed automatic transmission for front-wheel drive cars.
How much torque can the Toyota U660E handle?
The Toyota U660E is designed for torque up to 400 Nm and engines up to 3.5 liters.
How much oil does the Toyota U660E take and which one?
The Toyota U660E takes 6.5 liters of oil. Partial replacement, liters: 3.0; 4.5 with the oil pan removed. Recommended oil: Toyota ATF WS.
How often should the Toyota U660E be serviced?
Recommended service interval: every 60 000 km.
How long does the Toyota U660E last?
With proper maintenance, the Toyota U660E typically lasts about 300 000 km.
How much does the Toyota U660E weigh?
The Toyota U660E weighs about 104 kg.
What are the gear ratios of the Toyota U660E?
Using a 2012 Toyota Venza with a 3.5 liter engine as an example: final drive 4.398, 1st 3.300, 2nd 1.900, 3rd 1.421, 4th 1.000, 5th 0.713, 6th 0.609, reverse 4.148.
What cars was the Toyota U660E installed on?
Lexus ES350 5 (XV40) in 2006 – 2012 (as TM-60LS); Lexus ES350 6 (XV60) in 2012 – 2018 (as TM-60LS); Lexus RX270 3 (AL10) in 2010 – 2015 (as TM-60LS); Lexus RX350 3 (AL10) in 2008 – 2015 (as TM-60LS); Toyota Alphard 2 (AH20) in 2008 – 2015; Toyota Alphard 3 (AH30) in 2015 – 2017 and 17 more (see the full list above).
What are the common problems of the Toyota U660E?
This gearbox is paired with powerful engines, and under active driving with frequent hard starts the lockup clutch wears out quickly and clogs the valve body. Sometimes the torque converter hub overheats so badly that it welds itself to the bushing. The best known weak point of this automatic transmission is the main thrust bearing: its retaining ring works loose and the bearing destroys its seat in the gearbox housing. Vibrations then appear and break up the planetary gearset bearings. All known problems.





