CVT Toyota K111F

CVT Toyota K111F
Type
CVT
Drive
AWD
Torque
up to 200 Nm
Engine size
up to 2.0 L
Oil capacity
8.7 LToyota CVT Fluid FE
Lifespan
~250 000 km

The Toyota K111F continuously variable transmission was produced at the Aisin plant from 2004 to 2019 and was installed on the all-wheel drive Noah, Voxy and RAV4 with the 1AZ-FSE, 3ZR-FE and 3ZR-FAE engines. The front-wheel drive version of this transmission is known under its own index, the K111.

Specifications

Type continuously variable transmission
Number of gears ∞
Type of drive all wheel
Engine volume, l up to 2.0
Torque output, Nm up to 200
Recommended oil Toyota CVT Fluid FE
Oil capacity, liter 8.7
Partial replacement, liter 4.0
7.0 with the oil pan removed
Maintenance every 60 000 km
Gearbox lifespan, km ~250 000 km
Weight, kg 113.8

Gear ratios Toyota K111F

Using a 2011 Toyota RAV4 with a 2.0 liter engine as an example:

Forward 2.396 – 0.428
Reverse 1.668
Final Drive 5.791

Using

The transmission was installed on:

  • Toyota Noah 1 (R60) in 2004 – 2007;
  • Toyota Noah 2 (R70) in 2007 – 2014;
  • Toyota RAV4 3 (XA30) in 2008 – 2013;
  • Toyota RAV4 4 (XA40) in 2012 – 2019;
  • Toyota Voxy 1 (R60) in 2004 – 2007;
  • Toyota Voxy 2 (R70) in 2007 – 2013;
  • Toyota Isis 1 (AM10) in 2004 – 2017.

Disadvantages of the Toyota K111F gearbox

  • With careful driving and regular oil changes this transmission lasts quite a long time;
  • But frequent hard acceleration and prolonged wheelspin quickly destroy the bearings;
  • Contamination in the oil also wears out the solenoids in the valve body;
  • The oil pressure then drops, which greatly shortens the life of the belt and all the bushings;
  • If you ignore this for long, the oil pump bushing will simply be spun in its seat;
  • The variator is also afraid of overheating, so keep its heat exchanger clean.

Frequently asked questions about the Toyota K111F

What type of transmission is the Toyota K111F?

The Toyota K111F is a continuously variable transmission for all-wheel drive cars.

How much torque can the Toyota K111F handle?

The Toyota K111F is designed for torque up to 200 Nm and engines up to 2.0 liters.

How much oil does the Toyota K111F take and which one?

The Toyota K111F takes 8.7 liters of oil. Partial replacement, liters: 4.0; 7.0 with the oil pan removed. Recommended oil: Toyota CVT Fluid FE.

How often should the Toyota K111F be serviced?

Recommended service interval: every 60 000 km.

How long does the Toyota K111F last?

With proper maintenance, the Toyota K111F typically lasts about 250 000 km.

How much does the Toyota K111F weigh?

The Toyota K111F weighs about 113.8 kg.

What are the gear ratios of the Toyota K111F?

Using a 2011 Toyota RAV4 with a 2.0 liter engine as an example: forward 2.396 - 0.428, reverse 1.668, final drive 5.791.

What cars was the Toyota K111F installed on?

Toyota Noah 1 (R60) in 2004 – 2007; Toyota Noah 2 (R70) in 2007 – 2014; Toyota RAV4 3 (XA30) in 2008 – 2013; Toyota RAV4 4 (XA40) in 2012 – 2019; Toyota Voxy 1 (R60) in 2004 – 2007; Toyota Voxy 2 (R70) in 2007 – 2013 and 1 more (see the full list above).

What are the common problems of the Toyota K111F?

With careful driving and regular oil changes this transmission lasts quite a long time. But frequent hard acceleration and prolonged wheelspin quickly destroy the bearings. All known problems.

El Guardiola
Author
El Guardiola

Doctor of Technical Sciences, former engineer at the Volkswagen plant in Chattanooga, Tennessee (10 years of experience), holder of certificates and patents for inventions, author of a training manual for employees of the Volkswagen Group of America.
I consider the automotive transmission to be one of the most ingenious mechanisms in a car and I want to provide information about gearboxes to a wide range of car owners.

The most complete catalog of car transmissions: specifications, gear ratios, oil capacity, typical problems and lifespan of automatic, CVT, DCT and manual gearboxes.

Scroll to Top