CVT Toyota K310

CVT Toyota K310
Type
CVT
Drive
FWD
Torque
up to 145 Nm
Engine size
up to 1.5 L
Oil capacity
8.1 LToyota CVT Fluid TC / FE
Lifespan
~300 000 km

The Toyota K310 continuously variable transmission was produced at the TM Hokkaido plant from 2006 to 2020 and was installed on the Auris, Allion and Vitz together with the naturally aspirated 1NR-FE and 1NZ-FE engines. There is a version of this transmission for all-wheel drive models under its own index, the K310F.

Specifications

Type continuously variable transmission
Number of gears ∞
Type of drive front
Engine volume, l up to 1.5
Torque output, Nm up to 145
Recommended oil Toyota CVT Fluid TC / FE
Oil capacity, liter 8.1
Partial replacement, liter 5.0
Maintenance every 60 000 km
Gearbox lifespan, km ~300 000 km
Weight, kg 73.0

Gear ratios Toyota K310

Using a 2010 Toyota Corolla Fielder with a 1.5 liter engine as an example:

Forward 2.386 – 0.411
Reverse 2.505
Final Drive 5.698

Using

The transmission was installed on:

  • Toyota Auris JDM 1 (E150) in 2006 – 2012;
  • Toyota Allion 2 (T260) in 2007 – 2016;
  • Toyota Corolla Axio 1 (E140) in 2006 – 2012;
  • Toyota Corolla Fielder 2 (E140) in 2006 – 2012;
  • Toyota Corolla Rumion 1 (E150) in 2007 – 2012;
  • Toyota Ist 2 (XP110) in 2007 – 2016;
  • Toyota Premio 2 (T260) in 2007 – 2016;
  • Toyota Ractis 2 (XP120) in 2010 – 2012;
  • Toyota Vitz 3 (XP130) in 2010 – 2020;
  • Subaru (as XB-20LN) Trezia 1 (NCP120) in 2010 – 2016.

Disadvantages of the Toyota K310 gearbox

  • This transmission is paired with fairly modest engines and has a decent service life;
  • The Forward drum problem typical of the K3 series occurs rarely here;
  • However, with rare oil changes the valve body quickly gets clogged with wear debris;
  • This transmission also does not tolerate hard starts or prolonged wheelspin;
  • After 200,000 km the bearings and a stretched belt are often replaced.

Frequently asked questions about the Toyota K310

What type of transmission is the Toyota K310?

The Toyota K310 is a continuously variable transmission for front-wheel drive cars.

How much torque can the Toyota K310 handle?

The Toyota K310 is designed for torque up to 145 Nm and engines up to 1.5 liters.

How much oil does the Toyota K310 take and which one?

The Toyota K310 takes 8.1 liters of oil (5.0 liters for a partial change). Recommended oil: Toyota CVT Fluid TC / FE.

How often should the Toyota K310 be serviced?

Recommended service interval: every 60 000 km.

How long does the Toyota K310 last?

With proper maintenance, the Toyota K310 typically lasts about 300 000 km.

How much does the Toyota K310 weigh?

The Toyota K310 weighs about 73.0 kg.

What are the gear ratios of the Toyota K310?

Using a 2010 Toyota Corolla Fielder with a 1.5 liter engine as an example: forward 2.386 - 0.411, reverse 2.505, final drive 5.698.

What cars was the Toyota K310 installed on?

Toyota Auris JDM 1 (E150) in 2006 – 2012; Toyota Allion 2 (T260) in 2007 – 2016; Toyota Corolla Axio 1 (E140) in 2006 – 2012; Toyota Corolla Fielder 2 (E140) in 2006 – 2012; Toyota Corolla Rumion 1 (E150) in 2007 – 2012; Toyota Ist 2 (XP110) in 2007 – 2016 and 4 more (see the full list above).

What are the common problems of the Toyota K310?

This transmission is paired with fairly modest engines and has a decent service life. The Forward drum problem typical of the K3 series occurs rarely here. All known problems.

El Guardiola
Author
El Guardiola

Doctor of Technical Sciences, former engineer at the Volkswagen plant in Chattanooga, Tennessee (10 years of experience), holder of certificates and patents for inventions, author of a training manual for employees of the Volkswagen Group of America.
I consider the automotive transmission to be one of the most ingenious mechanisms in a car and I want to provide information about gearboxes to a wide range of car owners.

The most complete catalog of car transmissions: specifications, gear ratios, oil capacity, typical problems and lifespan of automatic, CVT, DCT and manual gearboxes.

Scroll to Top