The Toyota K310F continuously variable transmission has been produced at the Japanese company’s plant since 2006 and is installed on all-wheel drive versions of the Probox, Ractis and Sienta with the 1NR-FE and 1NZ-FE engines. The front-wheel drive version of this transmission is known under its own index, the K310.
Specifications
| Type | continuously variable transmission |
| Number of gears | ∞ |
| Type of drive | all wheel |
| Engine volume, l | up to 1.5 |
| Torque output, Nm | up to 145 |
| Recommended oil | Toyota CVT Fluid FE Toyota CVT Fluid TC before 2010 |
| Oil capacity, liter | 8.1 |
| Partial replacement, liter | 5.0 |
| Maintenance | every 60 000 km |
| Gearbox lifespan, km | ~300 000 km |
| Weight, kg | 73.5 |
Gear ratios Toyota K310F
Using a 2015 Toyota Probox with a 1.5 liter engine as an example:
| Forward | 2.386 – 0.411 |
| Reverse | 2.505 |
| Final Drive | 5.698 |
Using
The transmission was installed on:
- Toyota Auris JDM 1 (E150) in 2006 – 2012;
- Toyota Auris JDM 2 (E180) in 2012 – 2018;
- Toyota Corolla Axio 1 (E140) in 2006 – 2012;
- Toyota Corolla Axio 2 (E160) in 2012 – 2025;
- Toyota Corolla Fielder 2 (E140) in 2006 – 2012;
- Toyota Corolla Fielder 3 (E160) in 2012 – 2025;
- Toyota Ist 2 (XP110) in 2007 – 2016;
- Toyota Porte 2 (NP140) in 2012 – 2020;
- Toyota Probox 2 (XP160) since 2014;
- Toyota Ractis 2 (XP120) in 2010 – 2016;
- Toyota Sienta 2 (XP170) in 2015 – 2022;
- Toyota Succeed 2 (XP160) in 2014 – 2020;
- Toyota Vitz 3 (XP130) in 2010 – 2020;
- Subaru (as XB-20LN) Trezia 1 (NCP120) in 2010 – 2016.
Disadvantages of the Toyota K310F gearbox
- This is a reliable transmission and with careful use and frequent oil changes it lasts a long time;
- However, the bearings do not tolerate hard acceleration and can start humming by 100,000 km;
- And prolonged wheelspin can strip the splines in the Forward drum altogether;
- Change the fluid regularly or the valve body will simply get clogged with wear debris;
- The pressure in the system will then drop and the belt and bushings will wear out quickly;
- It is important to keep the heat exchanger clean, as this transmission dislikes overheating.
Frequently asked questions about the Toyota K310F
What type of transmission is the Toyota K310F?
The Toyota K310F is a continuously variable transmission for all-wheel drive cars.
How much torque can the Toyota K310F handle?
The Toyota K310F is designed for torque up to 145 Nm and engines up to 1.5 liters.
How much oil does the Toyota K310F take and which one?
The Toyota K310F takes 8.1 liters of oil (5.0 liters for a partial change). Recommended oil: Toyota CVT Fluid FE; Toyota CVT Fluid TC before 2010.
How often should the Toyota K310F be serviced?
Recommended service interval: every 60 000 km.
How long does the Toyota K310F last?
With proper maintenance, the Toyota K310F typically lasts about 300 000 km.
How much does the Toyota K310F weigh?
The Toyota K310F weighs about 73.5 kg.
What are the gear ratios of the Toyota K310F?
Using a 2015 Toyota Probox with a 1.5 liter engine as an example: forward 2.386 - 0.411, reverse 2.505, final drive 5.698.
What cars was the Toyota K310F installed on?
Toyota Auris JDM 1 (E150) in 2006 – 2012; Toyota Auris JDM 2 (E180) in 2012 – 2018; Toyota Corolla Axio 1 (E140) in 2006 – 2012; Toyota Corolla Axio 2 (E160) in 2012 – 2025; Toyota Corolla Fielder 2 (E140) in 2006 – 2012; Toyota Corolla Fielder 3 (E160) in 2012 – 2025 and 8 more (see the full list above).
What are the common problems of the Toyota K310F?
This is a reliable transmission and with careful use and frequent oil changes it lasts a long time. However, the bearings do not tolerate hard acceleration and can start humming by 100,000 km. All known problems.





