The Toyota U660F 6-speed automatic transmission was assembled in Japan from 2007 to 2018 and was installed on all-wheel drive versions of the Alphard, Sienna and Venza with the 3.5-liter 2GR-FE engine. On the Lexus RX270 and RX350 crossovers this automatic was fitted under its own index, TM-60LS.
Specifications
| Type | automatic transmission |
| Number of gears | 6 |
| Type of drive | all wheel |
| Engine volume, l | up to 3.5 |
| Torque output, Nm | up to 400 |
| Recommended oil | Toyota ATF WS |
| Oil capacity, liter | 6.5 |
| Partial replacement, liter | 3.0 4.5 with the oil pan removed |
| Maintenance | every 60 000 km |
| Gearbox lifespan, km | ~300 000 km |
| Weight, kg | 104 |
Gear ratios Toyota U660F
Using a 2011 Toyota Sienna with a 3.5 liter engine as an example:
| Main | 3.935 |
| 1st | 3.300 |
| 2nd | 1.900 |
| 3rd | 1.420 |
| 4th | 1.000 |
| 5th | 0.713 |
| 6th | 0.608 |
| Reverse | 4.148 |
Using
The transmission was installed on:
- Lexus RX270 3 (AL10) in 2010 – 2015 (as TM-60LS);
- Lexus RX350 3 (AL10) in 2008 – 2015 (as TM-60LS);
- Toyota Alphard 2 (AH20) in 2008 – 2015;
- Toyota Alphard 3 (AH30) in 2015 – 2017;
- Toyota Estima 3 (XR50) in 2007 – 2016;
- Toyota Highlander 3 (XU50) in 2013 – 2016;
- Toyota RAV4 3 (XA30) in 2009 – 2013;
- Toyota RAV4 4 (XA40) in 2012 – 2018;
- Toyota Sienna 3 (XL30) in 2010 – 2016;
- Toyota Venza 1 (GV10) in 2008 – 2016.
Disadvantages of the Toyota U660F gearbox
- This gearbox is paired with powerful V6 engines and its lockup clutch wears out quickly;
- This debris then clogs the valve body and jerking appears when shifting;
- In the most neglected cases the oil pump bushing is destroyed and oil leaks appear;
- But the main weak point of the transmission is the retainer of the main thrust bearing;
- Over time it works loose, the bearing breaks up and its pieces fly into the planetary gearset;
- Wear of the Teflon rings in the rear cover concerns the whole U-series;
- As they wear heavily, the oil pressure in the system starts to fall rapidly.
Frequently asked questions about the Toyota U660F
What type of transmission is the Toyota U660F?
The Toyota U660F is a 6-speed automatic transmission for all-wheel drive cars.
How much torque can the Toyota U660F handle?
The Toyota U660F is designed for torque up to 400 Nm and engines up to 3.5 liters.
How much oil does the Toyota U660F take and which one?
The Toyota U660F takes 6.5 liters of oil. Partial replacement, liters: 3.0; 4.5 with the oil pan removed. Recommended oil: Toyota ATF WS.
How often should the Toyota U660F be serviced?
Recommended service interval: every 60 000 km.
How long does the Toyota U660F last?
With proper maintenance, the Toyota U660F typically lasts about 300 000 km.
How much does the Toyota U660F weigh?
The Toyota U660F weighs about 104 kg.
What are the gear ratios of the Toyota U660F?
Using a 2011 Toyota Sienna with a 3.5 liter engine as an example: final drive 3.935, 1st 3.300, 2nd 1.900, 3rd 1.420, 4th 1.000, 5th 0.713, 6th 0.608, reverse 4.148.
What cars was the Toyota U660F installed on?
Lexus RX270 3 (AL10) in 2010 – 2015 (as TM-60LS); Lexus RX350 3 (AL10) in 2008 – 2015 (as TM-60LS); Toyota Alphard 2 (AH20) in 2008 – 2015; Toyota Alphard 3 (AH30) in 2015 – 2017; Toyota Estima 3 (XR50) in 2007 – 2016; Toyota Highlander 3 (XU50) in 2013 – 2016 and 4 more (see the full list above).
What are the common problems of the Toyota U660F?
This gearbox is paired with powerful V6 engines and its lockup clutch wears out quickly. This debris then clogs the valve body and jerking appears when shifting. All known problems.





